View APT2X101D100J_306304.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2
3
2
3 1
2 4
3
1
4
1
4
Parallel
SO
2 T-
27
Anti-Parallel
APT2X100D100J
APT2X101D100J
APT2X100D100J 1000V 100A APT2X101D100J 1000V 100A
DUAL DIE ISOTOP(R) PACKAGE
ULTRAFAST SOFT RECOVERY DUAL RECTIFIER DIODES
PRODUCT APPLICATIONS
* Anti-Parallel Diode * * * * *
-Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers
PRODUCT FEATURES
* Ultrafast Recovery Times * Soft Recovery Characteristics * Popular SOT-227 Package * Low Forward Voltage * High Blocking Voltage * Low Leakage Current
PRODUCT BENEFITS
* Low Losses * Low Noise Switching * Cooler Operation * Higher Reliability Systems * Increased System Power
Density
MAXIMUM RATINGS
Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage
All Ratings: TC = 25C unless otherwise specified.
APT2X100/2X101D100J UNIT
1000
Volts
Maximum Average Forward Current (TC = 40C, Duty Cycle = 0.5) RMS Forward Current Non-Repetitive Forward Surge Current (TJ = 45C, 8.3ms) Operating and StorageTemperature Range Lead Temperature: 0.063" from Case for 10 Sec.
100 170 1000 -55 to 150 300
C Amps
STATIC ELECTRICAL CHARACTERISTICS
Symbol Characteristic / Test Conditions IF = 100A VF Maximum Forward Voltage IF = 200A IF = 100A, TJ = 150C IRM CT LS USA
405 S.W. Columbia Street
MIN
TYP
MAX
UNIT
2.5 2.5 2.0 250 500 116 20
Phone: (541) 382-8028 Phone: (33) 5 57 92 15 15
Volts
Maximum Reverse Leakage Current
VR = VR Rated VR = VR Rated, TJ = 125C
A pF
053-0007 Rev D
Junction Capacitance, VR = 200V Series Inductance (Lead to Lead 5mm from Base)
APT Website - http://www.advancedpower.com
Bend, Oregon 97702-1035 F-33700 Merignac - France
nH
FAX: (541) 388-0364 FAX: (33) 5 56 47 97 61
EUROPE
Avenue J.F. Kennedy Bat B4 Parc Cadera Nord
DYNAMIC CHARACTERISTICS
Symbol trr1 trr2 trr3 tfr1 tfr2 IRRM1 IRRM2 Qrr1 Qrr2 Vfr1 Vfr2 diM/dt IF = 100A, diF /dt = -800A/s, VR = 540V (See Figure 10) Characteristic Reverse Recovery Time, IF = 1.0A, diF /dt = -15A/s, VR = 30V, TJ = 25C Reverse Recovery Time IF = 100A, diF /dt = -800A/s, VR = 540V Forward Recovery Time IF = 100A, diF /dt = 800A/s, VR = 540V Reverse Recovery Current IF = 100A, diF /dt = -800A/s, VR = 540V Recovery Charge IF = 100A, diF /dt = -800A/s, VR = 540V Forward Recovery Voltage IF = 100A, diF /dt = 800A/s, VR = 540V Rate of Fall of Recovery Current TJ = 25C TJ = 100C TJ = 25C TJ = 100C TJ = 25C TJ = 100C TJ = 25C TJ = 100C TJ = 25C TJ = 100C TJ = 25C TJ = 100C MIN
APT2X100/2X101D100J
TYP MAX UNIT
80 80 160 220 220 28 52 1120
95
ns
38
Amps
65
nC
4160 26
Volts
26 800
A/s
400
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol RJC RJA VIsolation WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance RMS Voltage (50-60 Hz Sinusoidal Waveform from Terminals to Mounting Base for 1 Min.) Package Weight MIN TYP MAX UNIT C/W Volts
0.42 20 2500 1.03 29.2 13.6
oz gm lb*in N*m
Torque
Maximum Torque (Mounting = 8-32 or 4mm Machine and Terminals = 4mm Machine)
1.5
0.5
D=0.5
, THERMAL IMPEDANCE (C/W)
0.1
0.2 0.1 0.05
0.05
0.02 0.01 0.01 0.005 SINGLE PULSE Note:
PDM
t1 t2
Z
JC
053-0007 Rev D
Duty Factor D = t1/t2 Peak TJ = PDM x ZJC + TC
0.001 10-5
10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
10-4
10
APT2X100/2X101D100J
300 Qrr, REVERSE RECOVERY CHARGE (nano-COULOMBS) 8000
TJ = 100C VR = 540V
IF, FORWARD CURRENT (AMPERES)
240 TJ = 150C TJ = 100C 120 TJ = 25C 60
6000 200A 100A 4000
180
2000 50A
TJ = -55C
0 0.5 1.0 1.5 2.0 2.5 3.0 VF, ANODE-TO-CATHODE VOLTAGE (VOLTS) Figure 2, Forward Voltage Drop vs Forward Current 80 IRRM, REVERSE RECOVERY CURRENT (AMPERES)
TJ = 100C VR = 540V
0
0 10 50 100 500 1000 diF /dt, CURRENT SLEW RATE (AMPERES/SEC) Figure 3, Reverse Recovery Charge vs Current Slew Rate 2.0
Kf, DYNAMIC PARAMETERS (NORMALIZED)
200A 60 100A
1.6 Qrr 1.2 IRRM trr trr
40
50A
0.8
20
0.4
Qrr
0 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/SEC) Figure 4, Reverse Recovery Current vs Current Slew Rate 400
TJ = 100C VR = 540V
-25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) Figure 5, Dynamic Parameters vs Junction Temperature 2500 50 Vfr, FORWARD RECOVERY VOLTAGE (VOLTS)
TJ = 100C VR = 540V IF = 100A
0.0
-50
trr, REVERSE RECOVERY TIME (nano-SECONDS)
200A 300 100A 50A 200
tfr, FORWARD RECOVERY TIME (nano-SECONDS)
2000
40
1500 Vfr 1000
30
20
100
500
tfr
10
0 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/SEC) Figure 6, Reverse Recovery Time vs Current Slew Rate 2000
0 0 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/SEC) Figure 7, Forward Recovery Voltage/Time vs Current Slew Rate
CJ, JUNCTION CAPACITANCE (pico-FARADS)
1000
500
100 0.01
0.05
0.1
0.5 1 5 VR, REVERSE VOLTAGE (VOLTS)
10
50
100
200
Figure 8, Junction Capacitance vs Reverse Voltage
053-0007 Rev D
Vr
APT2X100/2X101D100J
D.U.T. 30H
trr/Qrr Waveform
+15v diF /dt Adjust 0v -15v
PEARSON 411 CURRENT TRANSFORMER
Figure 9, Diode Reverse Recovery Test Circuit and Waveforms
1 2 3 4
IF - Forward Conduction Current diF /dt - Current Slew Rate, Rate of Forward Current Change Through Zero Crossing. Zero IRRM - Peak Reverse Recovery Current. trr - Reverse Recovery Time Measured from Point of IF 3 Current Falling Through Zero to a Tangent Line { 6 diM/dt} Extrapolated Through Zero Defined by 0.75 and 0.50 IRRM. 5 0.5 IRRM 0.75 IRRM 2 Qrr = 1/2 (trr . IRRM) 1 4 6
5 6
Qrr - Area Under the Curve Defined by IRRM and trr. diM/dt - Maximum Rate of Current Change During the Trailing Portion of trr.
Figure 10, Diode Reverse Recovery Waveform and Definitions
APT Reserves the right to change, without notice, the specifications and information contained herein.
SOT-227 Package Outline
11.8 (.463) 12.2 (.480) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 H100 (4 places)
31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322)
r = 4.0 (.157) (2 places)
4.0 (.157) 4.2 (.165) (2 places)
25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504)
3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504)
1.95 (.077) 2.14 (.084)
Anti-parallel Parallel APT2X100D100J APT2X101D100J Anode 2 Cathode 1 Cathode 2 Anode 2
053-0007 Rev D
Dimensions in Millimeters and (Inches)
Cathode 2
Anode 1
Cathode 1
Anode 1
ISOTOP(R) is a Registered Trademark of SGS Thomson.

▲Up To Search▲

Price & Availability of APT2X101D100J

	To Download APT2X101D100J Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .